2 (Two) 70’L x 30’W X 18’H Fabric Shelters

Notice ID:

AE202200001

Department/Ind. Agency:

DEPT OF DEFENSE

Sub-tier:

DEPT OF DEFENSE

Sub Command:

FA5000 673 CONS LGC

Office:

FA5000 673 CONS LGC

All Dates/Times are:

(UTC-09:00) ANCHORAGE, ALASKA, USA

Updated Published Date:

Nov 02, 2021 11:00 am AKDT

Original Published Date:

2021-11-02 09:43:00

Original Response Date:

Nov 10, 2021 03:00 pm AKST

Inactive Policy:

15 days after date offers due

Updated Inactive Date:

Nov 25, 2021

Original Inactive Date:

Nov 25, 2021

Initiative:

• None***--***

Original Set Aside:

Total Small Business Set-Aside (FAR 19.5)

Product Service Code:

5410 - PREFABRICATED AND PORTABLE BUILDINGS

NAICS Code:

236220 - Commercial and Institutional Building Construction

Original Set Aside:

The vendor shall lease two (2) temporary fabric maintenance shelters facilities. This is a lease of shelters from 20 February 2022 to 20 March 2022. This requirement shall include all work, labor, materials, and equipment required to setup the shelters at two (2) separate locations in the vicinity of Fairbanks, Alaska 99703. This requirement shall include flooring, lighting, generators, fuel and maintenance for the generators, fire protection devices and removal of facility at the conclusion of the exercise. Maintenance Shelter Specifications The shelter shall be at a minimum size of 70’L x 30’W x 18’H The shelter shall have at a minimum initial test that verify wind loads over 105 MPH and snow loads of 60 PSF The shelter shall be insulated to a minimum R-19 Automatic bay door with a minimum 14’ (height) x 12’ (wide) to include a manual backup for operations Automatic bay door shall also be rated for 105 MPH wind loads and insulated with a minimum R-19 Shall have enough lighting to ensure a lumination intensity of 50 candles Shall include the minimum amount of personal access doors to satisfy NFPA standards Shall include the minimum amount of Fire protection and carbon-monoxide alarms to satisfy NFPA standards Flooring: Sufficient enough for maintainers to work on 80,000lbs, 2-axle wheeled vehicles and towed equipment (i.e. flat, firm, dry, not muddy). Ground rods: Sufficient enough for generator and refueling operations. Manufactured per American Welding Standard requirements Framing must meet ASTM A500 standards Power Specifications Environmental Control Unit (ECU): necessary to maintain internal temperature above 50°+ F and the ability to withstand temperatures down to -40° F and a snow depth of 2 ft. Power generation/distribution: 60 Kw generator not to include power required for HVAC as well as four outlets along each long side of the tent (120V); total of 8 outlets. Contractor is responsible to supply fuel for the ECU/generator for the entire duration of the lease (20 February 2022 – 20 March 2020). Additional Specifications Contractor is to complete necessary groundwork and site preparation for installation to ensure site is level for structure installation. This includes but is not limited to removal of snow onsite, level of location, and any additional support required at the erection location. Contractor is required to assemble, inspect/maintain, disassemble and remove the structures over the course of the exercise. Delivery: Maintenance facility should be setup, emplaced and operational NLT 0900 on 20 Feb 2022. Vendor will conduct a joint inspection/inventory with receiving agent prior to delivery and setup to ensure valid locations. Vendor shall provide a delivery POC no later than 72 hours prior to setup all sites Site is accessible by a road system and will require military base access Pick up: Maintenance facility and associated equipment shall not be picked up NET 0900 and NLT 1700 on the requested pick up date. Government POC shall validate pick up schedule to the Vendor no later than 72 hours prior to pick up. Terms of Exchange or Relocation: All unserviceable items in the temporary maintenance facility shall be replaced within 24 hours to working order. Vendor shall provide a 24 hour point of contact for all maintenance/repairs/replacement for shelter and associated equipment.

CP 907 552 5614 10480 SIJAN AVE STE 242

JBER , AK 99506-2501

USA

Primary Point of Contacts:

Christopher Nelson

Secondary Point of Contact:

Joshua J Jordan